XL Microwave 2241A
Microwave antenna alignment
The Path Align-R™ (models 2200/01 & 2240/01*) test set is
a high performance, affordable and complete test solution designed
to quickly and accurately optimize the transmission
path between two microwave antenna site - all in a matter of
minutes! Because the Path Align-R™ directly drives the site's
antennas, the optimization process is done without the need
of the antenna site's radios, expensive and complex test
equipment, ground technicians, on-site AC power, cell
phones, two-way radios, etc. All that is required are the antennas
themselves! This means that the crew installing the
antennas can align the link as soon as the antennas are hung -
even before the rest of the equipment is on site!
The Path Align-R™ comes complete with everything needed
to align a microwave link and communicate between sites.
All you'll need to supply is the appropriate waveguide-to
coax adapters and the antennas!
Battery-Powered Alignment Test Set of two tranceivers with Instrument Back-pack (3.18 kg/unit)
Continuous Talk & Listen over Link via included headsets (Full-Duplex Voice, FM)
Tuneable Operating Bands of 1.8 to 19.4 Ghz (models 2200/2201) or 1.8 to 23.5 GHz (models 2240/2241)
Available with Record-R™ Data Logging of Position, Date/Time & Data
Tone Ranging provides variable-pitch indication of path loss
Path Loss Displayed in dB (0.1 dB resolution)
Display Updated every 300 ms
Transmission: Full-Duplex (simultaneous transmission and reception).
Transmitter Output Power: 0 dBm, nominal.
Deviation: 50 to 100 kHz
Tuneable Frequency Bands:
Band 1: 1.8 to 2.5 GHz, resolution 1.0 MHz;
Band 2: 3.5 to 5.0 GHz & 5.8 to 6.6 GHz, resolution 1.0 MHz;
Band 3: 7.5 to 10.0 GHz & 11.0 to 12.0 GHz, resolution 1.0 MHz;
Band 4: 18.1 to 19.4 GHz & 22.0 to 23.5 GHz, resolution 1.0 MHz.
Receiver Sensitivity: 100 dBm nom. (1.8–2.5 GHz); -95 dBm nom. (3.5–6.6 GHz); -90 dBm nom. (7.5–12.0 GHz); -90 dBm nom. (18.1–23.5 GHz).
Receiver Bandwidth: 100 kHz, nominal.