Tektronix FG501
Function Generator Requires TM5XX Power Module
Description
The Tektronix FG501 is a Function Generator.
The RG501 is intended to be used in any of the TM-Series power supplies, like the TM503. The frequency is adjusted by a decade switch for ranges and dial for X1 to X10. The frequency stability is better than 2% (a function of temperature). Additional offsets of up to ±5 V are accessible. Sinewave distortion is less than 1% and risetime is less than 100 nS on pulses. Triangle and ramp linearity is within ±1%.
Key Points
Outputs sine, square, triangular, pulse and ramp waveforms from 0.001 Hz to 1 MHz.
Output amplitudes of 15 Vp-p open circuit and 7.5 V into 50-ohms can be obtained
Frequency can also be controlled, over a 1000:1 range, by applying an external input to the VCF connector
