Agilent / HP / Keysight E1474A
E1474A Six 1 x 4, 75 Ohm RF Multiplexer
Description
This 75ohm RF Multiplexer is a C size, 1 slot, register based VXI module.
It is the ideal choice for video and telecommunications applications.
This unit is functionally identical to the E1472A except for output impedance.
It can be used as six multiplexers or combined with others to form a larger tree switched multiplexer or a limited stubless matrix.
This unit can easily be programmed with SCPI commands to scan multiple channels, where each channel is switched to its common, one at a time.
This module is arranged as six independent banks of channels (Bank 0 through Bank 5), each acting as a 1 x 4 one wire multiplexer.
Only one channel in each bank can be connected to its common at any time.
The multiplexer relays are arranged in a tree-switched configuration, providing high isolation and low VSWR. Each channel consists of a non latching armature relay.
Key Points
1 Slot, C size, register based
Six 1 x 4 multiplexers
Switch signals up to 1.3GHz
SMB male connectors for high performance
Controls the E1475A/E1473A RF expanders
Tree switching for high isolation, low VSWR
Specifications
Form Factor: Module (VXI)
Type: RF
Maximum Switchable Voltage: 42V
Maximum Switchable Current/Channel: 1A
Maximum Switchable Power/Channel: 24Watts
Connector Type to DUT: SMB(m)
