Agilent / HP / Keysight 6060A
6060A Order 6060B
Description
The new HP 6060A 300 Watt Single Input Electronic Load is designed for test, evaluation, and burn-in of DC power supplies, batteries, and power components.
It is suitable for applications in areas such as R&D, production test, and field repair.
The Electronic Load Family offers advantages in performance, quality, reliability, and
price/performance.
The built-in HP-IB interface further simplifies system integration and allows control and readback of all load functions.
The features and instruction set of the HP 6060A Single Input Load are compatible with the HP 6050A and HP 6051A mainframe load products. For example, test programs developed for an HP 6060A 300 Watt Single Electronic Load can be used later for an HP 60502A 300 Watt Module Load in another application.
The HP 6060A 300 watt load is suitable for bench use too.
The front panel keypad allows easy, repeatable and reliable control of the load when it is used manually.
Front panel settings are remembered after AC power is removed. The front panel LCD meters indicate voltage, current, and power readings.
Connection to the load is made at the rear panel; front panel binding posts are available as an option.
Key Points
HP-IB control of current, voltage and resistance
HP-IB readback of current, voltage and power
External analog programming of current in Constant Current mode
Built-in programmable pulse waveform generation
Protection from overpower, overtemperature, overcurrent, overvoltage and reverse polarity.
Parallelable in constant current mode
Software calibration
Non-volatile user-defined power-up state
Front panel voltmeter, ammeter and full feature keypad
IEEE 488.2 and HP-SL compatible instruction set
Trigger for external synchronization
Analog voltage & current monitors
Remote voltage sensing
Control signal for external disconnect or shorting relay
Rack mountable (3.5”)
Fan-speed control for low acoustic noise
Specifications
Modes: Constant current (CC), Constant voltage (CV), Constant resistance (CR)
DC Input Ratings: 0-60 A, 3-60 V, (current derated from 0-3 volts) power limited to 300W at 40 deg C (225 watts at 55oC)
Programmable ranges, CC mode: 0-6 A, 0-60 A, CR mode: 0.033-1.0 ohm, 1-1000 ohms, 10-10000 ohms
Programming Accuracy: ±0.1% ±65 ma (in 60A CC range)
Programming Resolution: 16mA (in 60A CC range)
Programming Accuracy: 0.05%±65ma, 0.05%±45mv
Built-in pulse waveform generation: Frequency(0.25 Hz – 10 KHz); Duty cycle (6-94%); Slew rate (1.0 A/mS to 5 A/micro S) in 60 A range
Analog programming bandwidth in CC mode: 10 kHz
Programmable electronic short: 33 milliohms (20 mohms typical)
Programmable electronic open: 20 k ohms (typical)
