Agilent / HP / Keysight 54645D
54645D 100-MHz 200-MSa/s Mixed Signal Oscilloscope
The Agilent / HP 54645D mixed-signal oscilloscope (MSO) can be used to easily view the complex relationships of your circuit's analog and digital operation.
Seamless integration of scope and logic channels in the 54645D MSO allows viewing both the analog circuit operation on the two 100 MHz scope channels and the logic timing displayed on the 16 logic channels.
The 54645D gives you an oscilloscope like operation of both the scope and logic channels. There is no scope-logic mode switch, just a seamless integration of logic channels into a scope.
The MegaZoom technology of Agilent 54645D captures long time spans while maintaining the high sample rate, allowing you to see the fine detail needed to solve elusive problems.
Before the introduction of the 54645D MSO with MegaZoom technology, deep-memory oscilloscopes were considered specialized tools because of their complex operation, non-responsive control panel, and excessive display dead time. Now you can have a deep memory scope in your lab that is also a scope you will use every day, as it is a deep-memory scope that responds instantly to your control inputs, has a high speed, low dead time display and deep memory with easy-to-use pan-and-zoom.
With an easy-to-use control system, the 54645D MSO provides the triggering power you need to troubleshoot problems which makes the 54645D ideal for everyday use because of its familiar scope edge triggering mode.
This familiar scope mode is the one that can be used to solve most of your problems, as you can trigger on a rising or falling edge on any of the MSO's 18 input channels.
Pattern triggering is provided in the 54645D MSO. This triggering mode allows you to establish a trigger pattern of high, low, and "don't care" levels across all 18 of its channels.
In the glitch mode, the 54645D MSO can search for a glitch that is less than a specified width on any of its 18 input channels, allowing you to find abnormally short pulses that may indicate circuit failures.
In advanced pattern trigger mode, the 54645D MSO will search for a combination of two trigger pattern terms. These terms may be combined in one of several Boolean relationships (AND, OR, THEN).
In TV mode the 54645D MSO may be triggered on field 1, field 2, or line of a composite TV waveform.
For connection to your PC, printer, or workstation, the 54645D is fully compatible with the full line of 546XX interface modules.
With the addition of the 54657A or 54659B Measurement/Storage module you will have both the interface capabilities described above, as well as additional measurements such as FFT.
With the addition of HP BenchLink Scope software, you have the ability to easily interface this powerful instrument to your PC. This versatile software, which is compatible with Windows 3.1, 95 or NT, makes the movement of waveform data or trace images fast and easy.
The 54645D MSO is designed and built to the rugged requirements of MIL-T-28800. This means that the product is built to withstand the rigors of daily use as you test and debug your circuits.
Dual-channel 100-MHz scope with 200 MSa/s
1 MB of memory per scope channel
16 logic timing channels with 400 MSa/s on 8 channels (2 MB memory/ch)
200 MSa/s on 16 Channels (1 MB memory/ch)
Ideal for debugging 8- or 16-bit microcontroller systems
MegaZoom technology for easy-to- use responsive deed memory
Simple easy-to-use controls
Frequency Range/ Bandwith: 100MHz
Max. Vertical Sensitivity: 5V/div
Min. Vertical Sensitivity: 1mV/div
Number of Channels: 2 + 16CH
Record Length: "2,000,000"
Sample Rate: 200MSa/s
Type (D/A): Mixed Signal
Power Usage: 90 W
Voltage: 88-250 VAC
Size: 35.258 x 17.272 x 31.75 cm (12.7W x 6.8H x 12.5D in)
Weight: Approx. 6.35 kgs (14 lbs)