Agilent / HP / Keysight 10474A
10474A 8-Channel Probe Lead Set for 16522A
Description
This Lead Set needs one clock pod and up to four data pods.
Each data pod provides eight output channels.
Channel 7 on the 3-state pods has been brought out in parallel as a non 3-state signal.
By looping this output back into the 3-state enable line, the channel can be used as a 3-stated enable.
Key Points
Output typenote 2: 74ACT11244 with 100 O series; 10H125 on a non 3-state channel 7
3-State enable: negative true, 100kO to GND, enabled on no connect
Typical skew measurements made at pod connector with approximately 10pF/50kO load to GND; worst case skew numbers are a calculation of worst case conditions through circuits
Channel 7 on the 3-state pods has been brought out in parallel as a non 3-state signal
Specifications
Maximum clock: 100MHz
Number of channels: 8
<
p>Skewnote 1: typical <4ns
worst case: 12ns