Keithley 7011C
Quad 1x10 Multiplier Card
Description
This multiplexer has four independent banks of 1×10 switching.
Each channel is 2 pole.
These four banks can be combined for a wide variety of switching configurations.
This mainframe can automatically configure to switch 4 pole signals by combining channel pairs.
This gives you a dual 1×10 4 pole multiplexer or a single 1×20 4 pole multiplexer.
Key Points
Quad 1×10 multiplexer for 2-, 4-, or 8-pole operation
Connects to 7001/7002 backplane for easy expandability
500nV, 100pA offsets
Specifications
Connector: 96 pin male DIN connector
Number of channels: 40Ch
Each channel: 2 poles
<
p>Offset current: <100pA
Actuation time: 3ms