Fluke 80T-150U
Probe Universal Temperature
Description
This Universal Temperature Probe is a self contained temperature to voltage converter.
The probe is designed to provide a direct temperature reading when it is connected to any high impedance DMM that is capable of 1mV resolution and at least a 300 count full scale readout capability.
The unit is housed in two separate but attached assemblies are temperature probe and a temperature to voltage converter.
The probe contains the temperature sensing element and is electrically connected to the temperature to voltage converter through a 46 inch shielded cable.
A three position switch on the converter acts as a power switch and is used for selecting Celsius or Fahrenheit scaling for the output.
Key Points
High accuracy temperature probe suitable for air, surface, and non corrosive liquids
Fast responding
Switch selectable for ºC or ºF
Standard 9V battery
Battery test instructions included
Specifications
Frequency range: -50°C to 150°C
Output to meter: 1mV
Resolution: 0.1°C or 0.1°F on the 300mV range of a 3 1/2 digit DMM
Accuracy: ±1°C (1.8°F), 0°C to 100°C (32°F to 212°F), decreasing linearly to ±3°C (5.4°F) at -50°C and +150°C
Electrical protection: 350VDC or peak AC
