Fluke 80I-1000S
Current Probe 1000A
Description
This Current Probe is compatible with oscilloscope inputs and provides a millivolt output signal to allow an oscilloscope to accurately reproduce current waveforms with minimal distortion.
Double and reinforced insulation throughout protects the user from working voltages of up to 600V rms.
The jaw size allows measurements on large power cable assemblies as well as on individual wires.
The 100KHz low pass output filter eliminates wideband noise.
Key Points
AC range from 0.1Amp to 1000Amp
Accuracy from 0.5A to 1000A 2%, 0.1A to 10A 3% ± 100mA
Frequency Response (-3db) from 5Hz to 100KHz
Maximum Conductor Diameter of 2.13" (54mm)
Maximum Conductor Size of 2-500 MCM or 1-1000 MCM
Output Levels of 1mV/A, 10mV/A, 100mV/A
1.6 meter TO BNC Termination Output Cable
CAT III, 600V Safety
Specifications
Form Factor: Probe
Type: Current Clamp
Freq. Range: 5Hz to 100KHz
<
p>Required Instrument Input Impedance: > 1Mohm // =<47pF
Maximum Conductor Size: 54mm (2.13")
Working Voltage: Clamp jaws to ground 600V rms