Fluke 700PTP

This Pneumatic Test Pump is designed to generate either vacuum to -11.6psi/-0.8 bar or pressure to 600psi/40 bar.

It features an integral pressure adjustment vernier which varies the pressurized volume by 2.0 cc over approximately eleven turns of the vernier knob.

The pressure variation achievable with the vernier will depend on the nominal pressure and total pressurized volume, but with a minimum volume and maximum pressure, the vernier provided 360 ¤20psi adjustment range.

With a minimum volume and no pressure applied, the vernier can also be used to provide a 0 to 70" H2O range.

Larger volumes will provide a smaller range of adjustment, but greater resolution.

The length of the stroke can be adjusted to limit the maximum output pressure.

Maximum output pressure is adjustable from 2.5psi to 600psi.