Direct Voltage Calibrator
This Direct Voltage Calibrator is equipped with bright vacuum fluorescent displays for clear visibility at any viewing angle.
It offers output voltage of 0 to 1100VDC with accuracy of 3ppm.
Completely automatic internal calibration, no mechanical adjustments.
Provisions for simplified external calibration.
Completely programmable through IEEE488 Interface.
Serial printer output for calibration constants and instrument test results.
This is recognized as one of the most accurate and stable DC standards available.
Full accuracy over extended temperature range of 10deg C
Completely automatic internal calibration, no mechanical adjustments
Simplified 5 minute external calibration to traceable standards
Procedure storage module for single button test setup
Completely programmable through the GPIB/IEEE488 interface
Serial printer output for calibration constants and instrument test results
Bandwidth: 0.1Hz to 1Hz
Ambient temperature: ±1°C
Line regulation: ±0.1ppm
Load regulation: ±0.1ppm
Output load impedance: greater than 80ohms