Anritsu S332B Cable/Antenna/Spectrum Analyzer
The Anritsu S332B is a hand held SWR/RL (standing wave ratio/return loss), and Distance-To-Fault (DTF) measurement instrument that includes a built-in synthesized signal source.
Anritsu S332B model includes a keypad to enter data and a liquid crystal display (LCD) to provide graphic indications of SWR or RL over the selected frequency range and selected distance.
The S332B is capable of up to 2.5 hours of continuous operation from a fully charged field-replaceable battery and can be operated from a 12.5 dc source.
Built-in energy conservation features can be used to extend battery life over an eight-hour work day.
The S332B is designed for measuring SWR, return loss, or cable insertion loss and locating faulty RF components in antenna systems. Power monitoring is available as an option.
The displayed trace can be scaled or enhanced with frequency markers or a limit line. A menu option provides for an audible “beep” when the limit value is exceeded.
To permit use in low-light environments, the LCD can be back lit using a front panel key.
The Software Tools PC-based software program provides a database record for storing measurement data. The Site Master Software Tools program also performs DTF (Distance To Fault) and Fault Location.
The Nickel Metal Hydride (NiMH) Battery supplied with the S332B Site Master is shipped in a discharged state. Before using the S332B, the internal battery must first be charged for three hours, either in the Site Master or in the optional battery charger.
Making a measurement with the Anritsu Site Master S332B is similar to using conventional spectrum analyzers. Users need simply to power-on and tune the Spectrum Analyzer to locate and display a signal on the screen.
Once a signal is displayed the user can measure the signal input in four simple steps to determine the frequency and amplitude of the signal. These steps include setting the center frequency, setting the frequency span, setting the amplitude, and activating the marker.
Synthesizer based Spectrum Analysis
Accurate Test of Antenna Systems and Active/Passive Components
Immunity to Live Site RF Interference
Synthesizer Accurate to 75 ppm
Automatically date/ time stamp
Alphanumeric labeling give distinct names
Extended memory capacity to 200 memory locations
Large VGA Display (640X480)
Display Resolution Settings can be adjusted to 130, 259 and 517 data points
Instrument calibration is valid in all data point setting
10 user configurations include calibrations
Field Replaceable Battery- No tools required
24 customized downloadable cable parameters
Math Functions: Trace - Memory, Trace + Memory
Reverse, over-voltage and under-voltage protection
Direct Printer Control via RS232 Serial Port
Frequency Range: 25 MHz to 3.3 GHz, 100 kHz to 3 GHz Spectrum Analysis
Frequency Resolution: 100 kHz
Frequency Span: 0 Hz
Frequency Accuracy: 75 parts per million @ 25oC
Sweep Time: 0.5 sec
RF input VSWR: 2.0:1
SWR Range: 1.00 to 65.00
SWR Resolution: 0.01
Return Loss Range: 0.00 to 54.00 dB
Return Loss Resolution: 0.01 dB
Cable Insertion Loss Range: 0.00 to 54.00 dB
Cable Insertion Loss Resolution: 0.01 dB
Aging: ±1 ppm/yr
Accuracy: ±2 ppm
Wattmeter Power Monitor:
Range: -80.00 to +80.00 dBm or 10.00 pW to 100.00 kW
Offset Range: 0 to +60.0 dB
Resolution: 0.1 dB or 0.1 xW
Test port, Type N: 50 ohms
Power Supply External DC Input: +12.5 to +15 Vdc, 1100 mA max.
Trace Memory: 200 maximum
Instrument Configuration.: 10 setup locations
RS-232: 9 pin D-sub, three wire serial
Storage: -20C to 75C
Operation: 0C to 50C
Weight: 1.82 kg (4.0 pounds)
Dimensions: 25.4 X 17.8 X 6.1 cm
10 X 7 X 2.4 inches