Agilent / HP / Keysight E4350B
E4350B Solar Array Simulator, 60V, 8A
Description
This unit is a DC power source with 480 watt output that simulates the output characteristics of a solar array.
This is primarily a current source with very low output capacitance and is capable of simulating the I-V curve of different arrays under various conditions.
The I-V curve is programmable over the IEEE-488.2 bus and is conveniently generated within the SAS.
Up to 60 volatile / non-volatile tables can be pre programmed.
Key Points
Less than 100nF output capacitance
Switching recovery time less than 5usec
Programmable over-voltage and over-current protection isolated from main circuits
Over-temperature protection
Fan speed control to minimize acoustic noise
Fast I-V curve change in both table and simulator modes
Serial link to connect up to 16 outputs to one IEEE-488.2 address
Standard Commands for Programmable Instruments (SCPI) and VXI plug&play drivers
Specifications
Output Ratings (Simulator and Table Modes):
Max. Power: 480W
Voc. Max.: 65V
Isc. Max.: 8A
Output Ratings (for mixed mode):
Max Power: 480W
V rated: 0-60V
I rated: 0-8A
Programming Accuracy at 25°C ±5°C:
Voltage (Fixed Mode): 0.075% + 10mV
Current (Simulator and Fixed Mode): 0.2% + 20mA
Ripple & Noise (20Hz to 20MHz):
Voltage rms: 16mV
Voltage p-p: 125mV
Current rms: 4mA
