Agilent / HP / Keysight E1353A
E1353A 16-Channel T/C FET Multiplexer
This FET Multiplexer is a B-size, 1-slot, register-based VXI module that switches 16 channels each of high, low, and guard.
When used with the E1326B DMM or E1411B DMM, it makes automatically compensated thermocouple temperature measurements.
The FET multiplexer module consists of a B-size component card (labeled E1351-66201) and a screw terminal block that plugs onto the component card.
This unit is functionally similar to the E1351A, E1352A, E1357A, and E1358A.
Common high, low, and guard signals are connected by tree switch to both the tree terminals on the terminal card and the analog bus connector.
A digital bus cable is shipped with each module. It attaches to a digital bus connector on the faceplates, and is used to synchronize scanned measurements up to 13,000/s with the Agilent DMMs.
Additionally, shunt and series signal conditioning elements can be added to each channel.
1-Slot, B-size, register based
Up to 13,000 channels/s scanning with HP
100,000 switches/s from downloaded scan
Built-in thermistor reference junction
Temperature, Voltage, Current, and Ohm
Form Factor: Module (VXI)
Number of Channels: 16Ch
Maximum Switchable Voltage: 16V
Maximum Switchable Current/Channel: 1mA
Minimum Bandwidth: 500MHz