Agilent / HP / Keysight 53147A
53147A Microwave Counter/Power Meter/DVM, 20 GHz
The Agilent 53147A Microwave Counter/Power Meter/DVM is a full-featured 20 GHz CW microwave counter, a true power meter, and a dc DVM all in one small, convenient package. It is the ideal tool for installation and maintenance of point-to-point microwave links as three of the most commonly made field measurements are combined into one instrument. In ATE systems, the three-in-one 53147A will also save valuable rack space.
Single, ultra-wideband CW microwave counter input, 50 MHz to 20 GHz
-70 dBm to +44 dBm power meter range with Agilent 8480 series sensors
High resolution/accuracy +/- 50 Vdc DVM
GPIB and RS-232 interfaces standard
Normal mode:10 Hz to 125 MHz
Low pass filter:10 Hz to 50 kHz
50 MHz to 20 GHz
Channel 1: 2 Vrms
50 MHz to 2 GHz:+5 dBm
2–46 GHz:+13 dBm
Channel 1:1 Mohm/60 pF
Channel 2:50 ohm
Channel 1:BNC female
Channel 2:SMA/APC-3.5 compatible female
Power Meter Specifications:
Frequency range:100 kHz to 50 GHz, sensor dependent.
Power range:-70 to +44 dBm, sensor dependent.
Power sensors:supported 8480 series (see table on page 8)
Resolution:0.01 dB in log mode, 0.1% of full scale in linear mode.
Power output:1.00 mW. Factory set to ± 0.7%, traceable to NIST.
Accuracy:±1.2% worst case (± 0.9 RSS) for one year.
Frequency:50 MHz (nominal)
Accuracy:±0.25% of reading ±10 mV
Damage level:±60 Vdc
Input resistance:0.5 Mohm (nominal)
Connector:4 mm banana sockets
Display:Replaces frequency display when DVM activated
Weight (nominal) 4.5 kg without battery option,6.6 kg with battery option
Operating temperature:0 to 55° C
Size:330 mm W x 156 mm H x 376 mm D with bumpers and handles. Rack panel is full EIA width and 3U ISO height
ac:90–132 Vac; 47.5–66 Hz or 360–440 Hz 216–264 Vac; 47.5–66Hz
Line selection Power requirements: automatic 80 VA max. (32 W typical)
dc (Option 002 only):11–18 Vdc; 2A max.