Agilent / HP / Keysight 44478B
44478B Dual 1x4 RF Multiplexer Module (1.3GHz, 75 Ohm)
Description
This Multiplexer Module is an ideal choice for broadband switching of high frequency or fast pulse signals.
Dual 1 to 4 multiplexers provide bi-directional switching of signals from DC to 1.3GHz.
High channel isolation (>55dB at 1GHz) assures quality dynamic range measurements using spectrum, network, or distortion analyzers.
Each 1 to 4 multiplexer consists of seven relays in a "tree" structure, which provides high isolation and low VSWR (voltage standing wave ratio).
All the connectors on the module's edge are female BNC for ease of wiring.
Off channels can be terminated in resistors to maintain proper operation of DUT circuitry.
Simply plug a 50/75ohm SMB type resistive termination onto the on board male SMB connector provided for each channel.
Key Points
Dual 1x4 RF multiplexer module
1 Connection terminal
1 certificate of verification
Switching up to 1A, 24W or 24VA
Insertion loss less than 1.9dB at 1.3GHz
Specifications
AC volts range Min/Max: 42V
DC volts range Min/Max: 42V
Number of channels: 43
Characteristic impedance: 75ohms
Form factor: Benchtop
