Agilent / HP / Keysight 4263B
4263B LCR Meter, 100 Hz to 100 kHz
Description
This unit is designed for both component evaluation on the production line and fundamental impedance testing for benchtop applications.
It has five test frequencies that allow you to simulate testing under the correct conditions: 100Hz, 120Hz, 1KHz, 10KHz, and 100KHz.
An optional 20KHz test frequency can be added to those five frequencies (Option 002).
Key Points
0.1% basic accuracy
AC Test Signal Levels:
20mV to 1Vrms in 5m Vrms steps
More Features:
100Hz, 120Hz, 1KHz, 10KHz, 100KHz test frequencies
High-speed measurement: 25ms
Test signal level monitor function
High-speed contact check
Wide capacitance test range
Transformer parameter measurements (option 001)
Specifications
Test frequencies: 100Hz, 120Hz, 1KHz, 10KHz, 100KHz
Option 4263B-002 adds 20KHz
AC test signal levels: 20m–1Vrms, 5mVrms steps
Basic accuracy: 0.1%
Impedance parameters: |Z|, R, X, |Y|, G, B, C, L, D, Q, u
Cable length settings: 0, 1, 2, 4 meters
Bias: 1.5 and 2.0Vdc
Error correction: Open, short, and load
Built-in system features: GPIB and handler interfaces
Measurement time (typical): 25ms at best conditions
Contact check time (typical): 5ms per measurement