Agilent / HP EPM-441A
Power Meter Single Channel
Description
This unit is a high performance, single channel power meter. Depending on sensors, available separately, it can measure from -70dBm to +44dBm at frequencies from 100KHz to 110GHz.
Key Points
High-performance, single-channel, programmable power meter
Fully compatible with the HP 8480 series of power sensors and the ECP
series of power sensors
Designed for bench and automatic test equipment (ATE) use, the EPM-441A
makes fast (up to 200 readings per second with ECP series sensors),
accurate and repeatable power measurements
Frequency Range: 100KHz to 50GHz and 75GHz to 110GHz, sensor dependent
Power Range: -70dBm to +44dBm (100pW to 25W), sensor dependent
Power Sensors: Compatible with all HP 8480 series and HP ECP series
sensors
Single Sensor Dynamic Range:
90dB maximum (HP ECP series sensors)
50dB maximum (HP 8480 series sensors)
Display Units:
Absolute: Watts or dBm
Relative: Percent or dB
Display Resolution: Selectable resolution of 1.0, 0.1, 0.01 and 0.001dB in log
mode, or 1 to 4 digits in linear mode
Default Resolution: 0.01dB in log mode, 3 digits in linear mode
Power Reference - Power Output: 1.00mW (0.0dBm)
Specifications
Frequency Range: 100KHz - 110GHz
Interfaces/Other: 0.5%
Min/Max Display Resolution: 1.0dB - 0.001dB
Min/Max Power: -70dBm - 44dBm
Type: Power Meter