Agilent / HP / Keysight 8133A
8133A Pulse Generator, 3 GHz
Description
The need for pulse generation is
fundamental to any device
characterization task. The ability to
emulate the pulse conditions to which
the device will be subjected is
essential. This emulation should
include both typical and worst case
conditions. Such accurate emulation
requires superlative signal integrity
and timing performance.
The Agilent 8133A 3 GHz Pulse
Generator provides pulses with
programmable period from 333 ps to
30 ns, full 3 GHz pulse capability on
all channels. The pulse width can be
programmed too, along with a delay
or the interchannel delay. At these
frequency ranges the transition time
performance becomes critical; less
than 100 ps is specified, less than
60 ps is typical, so excellent signal
integrity is assured. And last but not
least, a typical jitter of 1 ps creates
precise and accurate timing
conditions.
Key Points
Frequency range from 15 MHz - 3.35 GHz
Single output channel
Low jitter
Fast rise times (20%-80%) < 60 ps
Delay modulation (jitter emulation)
Variable crossover point (eye deformation) LVDS applications can be addressed with output levels from 50 mV to 2 V PRBS from 25-1 to 231-1
All inputs and outputs are SMA (f) 3.5 mm connectors
Specifications
Frequency Range:33.0 MHz to 3.0000 GHz
Period Range:333 ps to 30.303 ns
Timing resolution:3.5 digits, 1 ps best case
RMS Jitter (period, delay, width):less than 5 ps (1 ps typical)
Accuracy:± 0.5% (± 0.1% typical)
Width range:150 ps to (period ? 150 ps) maximum 10.000 ns
Resolution:1ps
Accuracy: ± 100 ps (± 30 ps typical)
Duty Cycle:0% to 100%
Resolution:0.1%, best case 1
Resolution :1 ps
Amplitude: 0.30 V to 3.00 V
Level window: -2 V to +4 V (-3 to +4 V typical)
Level Accuracy :± 2% of amplitude ± 2% of setting ± 20 mV
Resolution: 10 mV
Output connectors :SMA Connectors on the front panel
Source Impedance :50 ohm
Skew between differential outputs: < 20 ps nominal
Max. external voltage: ± 3 V nominal
Short circuit current :-120 mA max. £ Isc £ 160 mA nominal
Transition Times (10/90): < 100 ps (60 ps typical)
Transition Times(20/80:) < 60 ps (40 ps typical)
Settling time :1 ns
Overshoot/preshoot/ringing:< 15% of amplitude ± 20 mV Differential Outputs
General Information:
Power: 110-120/220-240Vrms, ± 10%, 25OVA max., 47-63Hz
Weight Net: 21.5 kg (48 lb)
Dimensions(HxWxD):145 mm x 426 mm x 525 mm (5.7 in x 16.75 in x 20.65 in)
Environmental:
Storage temperature: -40°C to +70°C
Operating temperature: O°C to 55°C
Humidity (0' C to 40' C): 95% R.H.
