Agilent / HP / Keysight 8114A
8114A High Power Pulse Generator, 100 V / 2 A
Description
The 8114A 100V / 2A Pulse Generator is a high power, single output source that delivers fast, clean, positive or negative pulses at frequencies up to 15 MHz. The pulse generator protects the device under test through user-definable limits for voltage, current and duty cycle. Additionally, a TTL input allows the output to be enabled or disabled. An option is available that allows the baseline to be adjusted in the +/- 25 V range. Transitions are less than 12 ns for high impedance mode into 50-ohm loads, baseline 0 V. In 50 Ohm mode into 50-Ohm loads, the maximum voltage is 50 Vpp with transitions less than 7 ns. The variable baseline option requires the 50 Ohm/50 Ohm mode. The 8114A is ideal for driving devices such as laser and IR diodes, EEPROMS and flash memories which operate at high voltages or currents. The 8114A is programmable via an IEEE-488 interface. A memory card interface is provided for easy storage of waveform setups.
Key Points
Single-channel high power pulse generator
15 MHz
50 Vpp 50 Ω / 50 Ω
Max. amplitude 100 V (HI-Z/50 Ω)
Max. current 2 A (HI-Z/50 Ω)
Voltage, current, and duty cycle protection
Optional baseline shift of +/- 25 V
Specifications
Timing characteristics:
Frequency Range:1 Hz to 15 MHz
Timing resolution: 3 digits, 100 ps
Period range: 66.7 ns to 999 ms
Additional variable delay range: 0 ns to 999 ms
Level/Pulse performance Characteristics:
Amplitude: 1V to 50 V or 20 mA to 1 A
Accuracy: +- 1%
Pulse Window: +- 50V
Base line noise: 10 mV RMS
Output connectors: BNC
Source Impedance: 50 ohm
weight: 17 kg
