Agilent / HP 8113x
3.35 GHz Pulse Pattern Generators
Description
The need for pulse and pattern
generation is fundamental to
digital device characterization
tasks. The ability to emulate
the pulse and pattern conditions
to which the device will
encounter in its final application,
is essential. This emulation
should include both typical
and worst case conditions.
Accurate emulation requires
superlative signal integrity and
timing performance along with
full control over parameters
that allow specific worst case
testing.
The Agilent 81133A and
81134A 3.35 GHz Pulse
Pattern Generators provide
programmable pulse periods
from 15 MHz (66.6 ns) to 3.35
GHz (298.5 ps) on all channels.
With frequency ranges
this fast, the transition time
performance becomes critical;
the Agilent 81133A and
81134A perfom at less than 60
ps transition. With a RMS jitter
of 1.5 ps (typ), the best signal
quality is assured. The Delay
Control Input and the Variable
Crossover Point functionalities
allow fast and easy Signal
Integrity measurements,
including emulation of real
world signals by adding jitter
to clock or data signals or by
distorting the 'eye' for eye diagram
measurements.
Key Points
Pulse, Data Pattern and PRBS generation from 15 MHz up to 3.35 GHz
Data formats NRZ, RZ and R1
12 Mbit pattern memory per channel
Low jitter, high accuracy
Fast transition times
PRBS generation from 25 - 1 …231 -1
Delay control input for predefined jitter input
Jitter emulation up to ± 250 ps
Easy- to-use graphical user interface
50 mV to 2 Vpp output amplitude
Differential Outputs
1 or 2 channels
