Agilent / HP 4274A
Digital LCR Meter 100Hz to 100KHz
Description
This unit is a microprocessor based impedance measuring instrument that Evaluates LCR components, complex components, and semiconductor materials.
The meter measures equivalent series resistance (ESR), impedance (|Z|), phase angle (Theta), reactance (X), susceptance (B), and conductance (G), in addition to the conventional L, C, R, D and Q parameters.
It measures only the value of the component and/or device under test, with 5 1/2-digit resolution and 0.1% basic accuracy by reducing the possibility of errors due to self or mutual inductance, stray capacitance and/or residual inductance in the test leads or test fixture used.
This measurement is obtained by a four terminal pair configuration and a built in automatic zero offset to compensate for these errors. A self test provides an automatic operational verification check indicating a pass or fail condition.
Key Points
Measures 13 parameters
GPIB
Specifications
Accuracy: 0.1%
Test frequencies
100Hz to 100KHz (4274A)
10KHz to 10MHz (4275A)
Test signal level
1mV to 5Vrms (4274A)
1mV to 1Vrms (4275A)
High Resolution : 5.5 digit