Agilent / HP 16089A
Kelvin Clip Leads
Description
This Clip leads will make it possible to measure odd shaped components that cannot be measured with conventional fixtures.
It is equipped with two insulated Kelvin clips.
Open and short compensations are recommended before measurement.
For open compensation, do not connect this unit to anything.
Short compensation is performed by holding a shorting plate with this unit.
After performing open and short compensations, the DUT is held with this unit.
Key Points
Frequency range from 5Hz to 100KHz
DC Bias from -42V to +42V
Terminal Diameter of 15mm or less
Cable Length of Approx.0.94m
BNC Terminal Connection
Maximum Voltage of ±42V peak max
Operating Temperature: 0°C to 55°C
Specifications
Frequency: 5Hz to 100KHz
DC Bias: -42V to +42V
Terminal Diameter: 15mm or less
Cable Length: Approx.0.94m
Terminal Connection: BNC, 4 terminal pair
Maximum Voltage: ±42V peak max (AC+DC)
Operating Temperature: 0°C to 55°C