Advantest R3962A
S-Parameter Test Set
Description
The Advantest R3962A is S parameter test set which can be connected with R3765A/R3767A Network Analyzer and available to measure the transmission and reflection characteristic of the two ports device.
The transmission and reflection characteristic of foreword direction and reverse direction can be measured simultaneously without disconnecting DUT (device under test) from the test port.
The R3962A network analyzer is an instrument which measures the complex transmission and reflection characteristics of two port devices in the frequency domain.
R3962A does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two port.
Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest.
The R3962A unit utilizes synthesized frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels.
It also can perform ratioed measurements (including phase), which require multiple receivers.
This unit can provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group-delay response.
Key Points
Desktop Unit
Duplexer Test Set
Directionality of 22-30dB
Test Port Load Match 22-30dB
Switch Termin auto w/o Recnnct
Specifications
Form Factor: Benchtop
Frequency range: 40 MHz to 8.0 GHz
Directivity: 30 dB (40 MHz to 2.6 GHz), 26 dB (2.6 GHz to 3.8 GHz), 22 dB (3.8 GHz to 8.0 GHz)
Test port load match: 18 dB (40 MHz to 2.6 GHz), 16 dB (2.6 GHz to 3.8 GHz), 14 dB (3.8 GHz to 8.0 GHz)
RF damage level: ±21 dBm max
Operating temperature: 0 to +50 deg C
Storing temperature: -20 to +60 deg C
Power Supply: Power is supplied from R3765A or R3767A
Dimensions: Approx. 424 W X 88 H X 400 L mm
Mass: Less than 5 kg
