Advantest R3131A
Spectrum Analyzer 9KHz to 3GHz
Description
The R3131A is an excellent operability, usability and easy-to-use personal spectrum analyzer which combines high accuracy necessary for digital radio measurement
The R3131A can be used in diverse fields, for a multitude of applications.
The R3131A searches for the signal with the maximum level within the 3 GHz band and sets the center frequency automatically.
The R3131A then, reproduces the setting which existed immediately before execution of AUTO TUNE, allowing observation under the same measurement conditions.
The R3131A performs frequency measurement with the built-in frequency counter simply by moving the marker to the signal.
The R3131A can measure the power within the specified band of frequency diffuse signals and the total power of multi-carrier signals.
The R3131A can also be used to measure the occupied frequency bandwidth (OBW) and adjacent channel leakage power (ACP) which are essential to transmission characteristics testing for radio equipment.
The R3131A allows you to measure the total power within the window and display it as the channel power simply by setting the measurement window to the specified occupied bandwidth.
The total power from the spectrum displayed on the screen can be obtained by R3131A . This function is useful for total power measurement of multi-carrier signals.
The R3131A measures the frequency band which contains 99% of the total power of the spectrum displayed on the screen. In addition, the % value of OBW can be set to any desired value.
The measurement results can be displayed in graphical form, including upper and lower point data, up to the 2nd ACP, respectively, offset from the carrier and leakage power value at all the displayed frequency points.
The R3131A Spectrum Analyzer has the performance of a standard middle class spectrum analyzer and a low cost, the spectrum analyzer can be used in a wide range for many applications.
There is basically designed with a panel size assuming rack mount use.
The operation key layout is a simple, easy to use design which accommodates system use and personal use.
The R3131A allows spectrum analysis of the burst signal by supplying a trigger signal synchronizing with the burst transmission.
The R3131A allows you to store and recall measured waveform data and measurement conditions. The R3131A unit offers up to 10 dedicated files for storage. In addition, the built-in standard floppy disk drive allows, you to store them on MSDOS
formatted floppy disks.
The R3131A has shortened the time necessary for GPIB control and data transmission by half or more in comparison with former products. In addition, by reducing the settling time of the local oscillator, the waveform update rate in unit time has been doubled.
Key Points
Floppy Disk Drive
5.7 inch B/W STN Display
Built-in high accuracy OBW, ACP, and Power measurement functions which can be applied to digital radio measurement
Improved ease of use through Auto TUNE function
Total level accuracy guaranteed by Auto CAL function
Standard interfaces: GPIB, RS232C, Centronics, and FD drive
Large character display allows results to be seen
Substantial EMC measurement function
Improved system operation speed
Operation key arrangement for ease of use
Compact and light weight (12kg) with a space-saving design
High performance realized within an economical platform
Optional Tracking generator
Specifications
Frequency range: 9KHz to 3GHz
Bandwidth: 300Hz to 1MHz
Amplitude range: +30dBm to average noise level
Dynamic range: Up to 133dB
Input attenuator range: 0 to 50dB 10dB step
Operating temperature: 0 to +50 deg C, 85%RH max.
Storage conditions: -20 to +60 deg C
Power consumption: 200 VA max. (100 VAC)
Weight: 12 kg or less
Dimensions: Approx. 424 mm (W) x 177 mm (H)
x 300 mm (D)