Agilent / HP E5404A
Probe 34 Channels
Description
This Probe provides a convenient, reliable means of probing your target system without the need for a connector.
It supports the new industry standard interface for smaller connectorless probing.
This new footprint is 30% smaller than our original soft touch probes making it easy to use in designs that are tight on space.
The soft touch top side retention module is mounted on the same side of the board as the connector less footprint so there is no need to access the back side of the board or for a special retention module for thick boards.
Agilent's soft touch connectorless technology ensures a long life of trouble free probing without the need for special plating or preparation of the probe site.
This probe can be used with any logic analyzer with 40 pin cable connectors.
Key Points
No connector on the target board
Industry standard connectorless footprint
34 channels, single ended clock and data
Extremely low, <0.7pF, equivalent load capacitance
Capable of data rates >2.5Gb/s (maximum rate dependent on analyzer used)
500 mV p-p minimum signal amplitude
Robust and reliable soft touch technology
Specifications
Number of Channels: 34
Equivalent load capacitance: 0.7pF
Maximum data rate: > 2.5Gb/s
Minimum signal amplitude: 500mV p-p