Agilent / HP / Keysight 8349A
8349A MICROWAVE AMPLIF
The Agilent/HP 8349A is a general purpose broadband instrumentation amplifier capable of providing gain and power to overcome systematic RF losses, drive high power devices, improve measurement system performance, and drive millimeter-wave source modules.
Systematic power losses include switching and signal routing in ATE systems, frequency conversion, and long transmission paths to remote devices like antennas. These losses can be overcome by using the 8349A.
The 8349A provide power to drive and characterize high power devices like mixers, power amplifiers, TWT’s and optical modulators which are very level-sensitive.
Filter rejection and switch isolation are examples of device characterizations requiring a great deal of dynamic range. The 8349A can be used to increase low level sweep speed in increased dynamic range measurements using a network analyzer.
The 8349A provides the power, DC bias, and control lines needed for proper operation of the Agilent/HP 83550 series of millimeter wave source modules.
Reduced systematic Power losses
High Power drive signals
Increased lo-level sweep speed
Increased Dynamic range
Frequency range: 2.0 to 20 GHz
Power flatness: ±1.25 dB
Maximum output power: 1.0 to 2.0 GHz - ≥ +20 dBm, 2.0 to 20.0 GHz - ≥ +25 dBm, 20.0 to 26.5 GHz - ≥ +23 dBm
Maximum microwave input: +27dBm
Maximum DC Voltage: ±10 V
Input Impedace: 50 ohms
Output Impedance: 50 ohms
Input SWR: < 2.8:1
Reverse isolation: >50 dB
Noise figure: < 13 dB
p>Rise/fall time: <10 ns
p>Delay time: <8 ns
Input and Output connectors: 3.5 mm male
Power requirement: 50 to 400 Hz, 100 120 200 or 240 volts AC(±10%); 85 VA max.
Weight: Net 7 kg; shipping 14 kg
Dimensions: 133 H X 214 W X 366 D mm