Tektronix DPO4104
Oscilloscope 1GHz 5GSa/s 4Ch
Description
The Tektronix DPO4104 digital phosphor oscilloscope (DPO) delivers the performance you need to visualize even your most demanding signals. With bandwidth of 1 GHz, and with a minimum of 5× oversampling on all channels and sin(x)/x interpolation standard, you can be confident that even the fastest transient events will be captured and displayed accurately.
The standard 10 M record length on all channels enables you to capture long windows of signal activity while maintaining fine timing resolution.
The Tektronix DPO4104 offers a variety of analytical solutions including cursors, 25 automatic measurements, statistics, and waveform math. Despite a tiny footprint (only 5.4" deep) and light weight (11 lbs.), the DPO4000 Series offers exceptional performance, a large 10.4" XGA display and knob per channel vertical controls.
Key Points
Specifications
#Vertical System:
Input Channels:4
Analog Bandwidth (–3 dB)5 mV/div to 1 V/div:1 GHz
Calculated Rise Time 5 mV/div (Typical):350 ps
Hardware Bandwidth Limits:20 MHz or 250 MHz
Input Coupling:AC, DC, GND
Input Impedance:1 MOHM ±1%, 50 OHM ±1%
Input Sensitivity,:1 MOHM 1 mV/div to 10 V/div
Input Sensitivity,:50 OHM 1 mV/div to 1 V/div
Vertical Resolution:8 bits
Max Input Voltage,:1 MOHM 250 VRMS with peaks =±400 V
Max Input Voltage,:50 OHM 5 VRMS with peaks =±20 V
DC Gain Accuracy:±1.5% with offset set to 0 V
#Horizontal System:
Maximum Sample Rate:5 GS/s
Maximum Record Length:10 M points
Timebase Range (s/div):400 ps to 1,000 s
Timebase Delay Time Range:–10 divisions to 50 s
Channel-to-channel Deskew Range:±100 ns
Long Term Sample Rate and Delay Time Accuracy:±5 ppm over any =1 ms interval
#General Characteristics:
Temperature:0 ºC to +50 ºC
Power Source Voltage:100 to 240 V ±10%
Power Source Frequency:47 to 66 Hz (90 to 264 V), 360 to 440 Hz (100 to 132 V).
Power Consumption:250 W maximum.