Tektronix DPO4054
Oscilloscope 500MHz 2.5GSa/s 4Ch
Description
The DPO4054 is a 4 channel, 500 MHz digital phosphor oscilloscope featuring Tektronix WaveInspector(TM) Controls to allow users to effectively and efficiently view, navigate, and analyze long record length acquisitions by using Zoom/Pan, Play/Pause, User Marks and Search functionality. The Wave Inspector(TM) feature provides a set of easy-to-use tools that simplify discovery, viewing, navigating and analyzing your waveform data.
The DPO4000 series is an ideal choice when working with today's most common serial buses such as CAN, SPI and I2C. The zoom, pan, play, pause, set, and mark capabilities of the Wave Inspector feature allows users to get through long serial data records quickly and easily. The DPO4000 Series Oscilloscopes are also well suited for a variety of other applications, including: Embedded Design and Debug, Investigation of Transient Phenomena, Power Measurements, Video Design and Debug, Spectral Analysis, Automotive Electronics Design and Debug, Manufacturing Test and Quality Control, Electromechanical Design and Analysis, Biomedical Product Development and Industrial Control.
The DPO4000 Series offers a variety of analytical solutions including cursors, 25 automatic measurements, statistics, and waveform math. Despite a tiny footprint (only 5.4" deep) and light weight (11 lbs.), the DPO4000 Series offers exceptional performance, a large 10.4" XGA display and knob per channel vertical controls.
Key Points
4 Channel
500 MHz Bandwidth
Maximum Sample Rate (all channels): 2.5 GS/s
10 Megasample Record Length on All Channels
3,700 wfms/s Maximum Waveform Capture Rate
Wave Inspector(TM) Controls
I2C, SPI, CAN Serial Triggering and Analysis
10.4 in. (264 mm) XGA Color Display
Small Footprint and Lightweight - only 5.4 in. (137 mm) deep and 11 lbs. (5 kg)!
USB and CompactFlash on Front Panel for Quick and Easy Storage
Built-in Ethernet Port
Plug 'n' Play Connectivity and Analysis Software Solutions
USB 2.0 Device Port for Direct PC Control of Oscilloscope using USBTMC
Suite of Advanced Triggers
e*Scope(R) Remote Viewing and Control
TekVPI(TM) Probe Interface Supports Active, Differential and Current Probes for Automatic Scaling and Units
Specifications
#Vertical System:
Input Channels:4
Analog Bandwidth (–3 dB)5 mV/div to 1 V/div:500 MHz
Calculated Rise Time 5 mV/div (Typical):700 ps
Hardware Bandwidth Limits:20 MHz or 250 MHz
Input Coupling:AC, DC, GND
Input Impedance:1 MOHM ±1%, 50 OHM ±1%
Input Sensitivity,:1 MOHM 1 mV/div to 10 V/div
Input Sensitivity,:50 OHM 1 mV/div to 1 V/div
Vertical Resolution:8 bits
Max Input Voltage,:1 MOHM 250 VRMS with peaks =±400 V
Max Input Voltage,:50 OHM 5 VRMS with peaks =±20 V
DC Gain Accuracy:±1.5% with offset set to 0 V
#Horizontal System:
Maximum Sample Rate:2.5 GS/s
Maximum Record Length:10 M points
Timebase Range (s/div):1 ns to 1,000 s
Timebase Delay Time Range:–10 divisions to 50 s
Channel-to-channel Deskew Range:±100 ns
Long Term Sample Rate and Delay Time Accuracy:±5 ppm over any =1 ms interval
#General Characteristics:
Temperature:0 ºC to +50 ºC
Power Source Voltage:100 to 240 V ±10%
Power Source Frequency:47 to 66 Hz (90 to 264 V), 360 to 440 Hz (100 to 132 V).
Power Consumption:250 W maximum.
