Tektronix DPO4034
Oscilloscope 350MHz 2.5GSa/s 4Ch
Description
Tektronix DPO4034 OSCILLOSCOPE; DIGITAL PHOSPHOR, 350 MHZ, 2.5 GS/S, 10M RECORD LENGTH, 4-CH, COLOR DISPLAY, CERTIFICATE OF TRACEABLE CALIBRATION STANDARD
The Tektronix DPO4034 oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.
The Tektronix DPO4034 oscilloscope's simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.
Key Points
3,700 wfms/s Maximum Waveform Capture Rate
Wave Inspector™ Controls Provide Unprecedented Efficiency in Waveform Analysis
I2C, SPI, CAN Serial Triggering and Analysis
10.4 in.
(264 mm) XGA Color Display
Small Footprint and Lightweight - only 5.4 in.
(137 mm) deep and 11 lbs.
(5 kg)
USB and CompactFlash on Front Panel for Quick and Easy Storage
Built-in Ethernet Port Plug and Play Connectivity and Analysis Software Solutions
USB 2.0 Device Port for Direct PC Control of Oscilloscope using USBTMC
Suite of Advanced Triggers
e*Scope® Remote Viewing and Control
Interoperability with Tektronix Logic Analyzers
TekVPI™ Probe Interface Supports Active, Differential and Current Probes for Automatic Scaling and Units
Specifications
#Vertical System:
Input Channels:4
Analog Bandwidth (–3 dB)5 mV/div to 1 V/div:350 MHz
Calculated Rise Time 5 mV/div (Typical):1 ns
Hardware Bandwidth Limits:20 MHz or 250 MHz
Input Coupling:AC, DC, GND
Input Impedance:1 MOHM ±1%, 50 OHM ±1%
Input Sensitivity,:1 MOHM 1 mV/div to 10 V/div
Input Sensitivity,:50 OHM 1 mV/div to 1 V/div
Vertical Resolution:8 bits
Max Input Voltage,:1 MOHM 250 VRMS with peaks =±400 V
Max Input Voltage,:50 OHM 5 VRMS with peaks =±20 V
DC Gain Accuracy:±1.5% with offset set to 0 V
#Horizontal System:
Maximum Sample Rate:2.5 GS/s
Maximum Record Length:10 M points
Timebase Range (s/div):1 ns to 1,000 s
Timebase Delay Time Range:–10 divisions to 50 s
Channel-to-channel Deskew Range:±100 ns
Long Term Sample Rate and Delay Time Accuracy:±5 ppm over any =1 ms interval
#General Characteristics:
Temperature:0 ºC to +50 ºC
Power Source Voltage:100 to 240 V ±10%
Power Source Frequency:47 to 66 Hz (90 to 264 V), 360 to 440 Hz (100 to 132 V).
Power Consumption:250 W maximum.
