Tektronix DPO4032
Oscilloscope 350MHz 2.5GSa/s 2Ch
Description
The Tektronix DPO4032 is a Factory Digital Phosphor Oscilloscopes with 2 Channels and a bandwidth of 350 MHz.
The DPO4032 is part of the newest addition to the Tektronix Digital Phosphor Oscilloscopes family,which is the DPO4000 Series. It is a 350 MHz, 2.5 GS/s, 10 M record length, and a 2 channel digital phosphor oscilloscope that was designed for engineers and for technicians who develop and debug the electronic designs.
Key Points
350 MHz Bandwidth Model
2 Channels
10 Megasample Record Length on All Channels
3,700 wfms/s Maximum Waveform Capture Rate
Wave Inspector™ Controls Provide Unprecedented Efficiency in Waveform Analysis
I2C, SPI, CAN Serial Triggering and Analysis
10.4 in. (264 mm) XGA Color Display
Small Footprint and Lightweight - only 5.4 in. (137 mm) deep and 11 lbs. (5 kg)!
USB and CompactFlash on Front Panel for Quick and Easy Storage
Built-in Ethernet Port
Plug ‘n’ Play Connectivity and Analysis Software Solutions
USB 2.0 Device Port for Direct PC Control of Oscilloscope using USBTMC
Suite of Advanced Triggers
e*Scope® Remote Viewing and Control
Interoperability with Tektronix Logic Analyzers
TekVPI™ Probe Interface Supports Active, Differential and Current Probes for Automatic Scaling and Units
Specifications
Bandwidth: 350MHz
Input Channels: 2
Analog Bandwidth (–3 dB)5 mV/div to 1 V/div: 350 MHz
Calculated Rise Time 5 mV/div (Typical): 1 ns
Hardware Bandwidth Limits: 20 MHz or 250 MHz
Input Coupling: AC, DC, GND
Input Impedance: 1 MOhm ±1%, 50 OHM ±1%
Input Sensitivity: 1 MOhm 1 mV/div to 10 V/div
Input Sensitivity: 50 Ohm 1 mV/div to 1 V/div
Vertical Resolution:8 bits
Max. Input Voltage,:1 MOhm 250 VRMS with peaks =±400 V
Max. Input Voltage,:50 Ohm 5 VRMS with peaks =±20 V
DC Gain Accuracy:±1.5% with offset set to 0 V
Horizontal System:
Maximum Sample Rate:2.5 GS/s
Maximum Record Length:10 M points
Timebase Range (s/div): 1 ns to 1,000 s
Timebase Delay Time Range: –10 divisions to 50 s
Channel-to-channel Deskew Range: ±100 ns
Long Term Sample Rate and Delay Time Accuracy: ±5 ppm over any =1 ms interval
General Characteristics:
Temperature: 0 ºC to +50 ºC
Power Source Voltage:100 to 240 V ±10%
Power Source Frequency:47 to 66 Hz (90 to 264 V), 360 to 440 Hz
(100 to 132 V).
Power Consumption: 250 W maximum.
