Tektronix 7CT1N
Curve Tracer Plug In
Description
This Curve Tracer is designed to operate with the 7000 series of oscilloscopes to provide a means of displaying the characteristics of small signal or lower dissipation power transistors or FET’s.
It can be used in either a vertical or horizontal compartment and uses a corresponding vertical or horizontal plug in to provide the other axis trace.
A cable or connector is provided on the front panel to provide this connection.
It can be detached from the front panel and extended to fit the plug in input or it can be left and a user supplied BNC adapter and cable used to connect.
The plug in used for the other axis must not be a 50ohm input unit.
A button is provided to determine which type compartment is being used on the front panel.
Key Points
Test Semiconductor Devices to 0.5Watts
10nA to 20mA/div Vertical Deflection Factors
0.5V to 20V/div Horizontal Deflection Factors
Operates in 7000 Series Mainframes
Specifications
Amplitude range: 1uA to1mA/step (Transistor Mode)
Amplitude range: 1uV to 1mV/step (FET Mode)
Impedance: 1Kohm +/-1%
Power levels: up to 0.5W