Tektronix 2445A
Oscilloscope 150MHz 4Ch
Description
The Tektronix 2445A is a Oscilloscopes with 4 Channels and a bandwidth of 150 MHz. The 2445A Oscilloscope has powerful features and portable versatility. Four independent channels, 150MHz bandwidth at probe tip, 250MHz minimum triggering bandwidth, 1ns/div sweep rate, and waveform cursors will provide flexibility. The other features are CRT readout, Delayed Sweep, Delta V, Delta T, 1/Delta T, Tracking and Independent modes, selectable 1 Mohm/50 ohms inputs, and an automatic front-panel DC balance adjust.
Key Points
150 MHz Bandwidth
2.33 ns Rise Time
Auto Setup
Save and Recall Setups
Set-Up Sequencing
On-Screen Trigger-Level Readout
Volts and Time Cursors with On-Screen Readout
Cursors After Delay
Four Independent Channels
Switchable 1 Mohm and 50 ohm Inputs (channels 1 & 2)
Channel 1 and Channel 2
Frequency Response (-3 dB Bandwidth): 150 MHz
Step Response: ≤ 2.33 ns
Horizontal System:
A Sweep Time Base Range: 500 ms/div to 10 ns/div in a 1-2-5 sequence of 24 steps. (X10 magnification extends fastest sweep rate to 1 ns/div)
B Sweep Time Base Range: 50 ms/div to 10 ns/div in a 1-2-5 sequence of 21 steps. (X10 magnification extends fastest sweep rate to 1 ns/div)
DT Readout Resolution: either 20 ps or 0.025% of full scale, whichever is greater
Sweep Delay Range: from 500 ms/div to 20 ns/div
Specifications
4 Channel scope
1 nS/div sweep rate
2 mV/div vertical sensitivity
Delaying timebase