Lecroy LT224
Oscilloscope 200MHz 4Ch 200MSa/s
Description
This Oscilloscope is a graph displaying device it draws a graph of an electrical signal.
In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.
This Oscilloscope's simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.
Key Points
Coupling Modes: AC,DC, HF, HF-REG, LF-REG
Acquisition Memory: 100kpts/Ch Memory: 16Mbytes
Specifications
Form factor: Benchtop
Number of channels: 4
Simultaneous channels: 4
Simultaneous sampling rate/ch: 200MSa/s
Vertical sensitivity range: 2mV/div to 10V/div
Number of bits: 8bits
Power Supply: 115 V (90 to 132 V) or 220 V (180 to 250 V), AC (~) power source at 45 Hz to 66 Hz.
Bandwidth: 200 MHz. Bandwidth @ 50 Ohms and at probe tip with PP006. Bandwidth Limiter at 25 MHz (LT224), and 25 MHz or 200 MHz (other models) can be selected for each channel.
Vertical Resolution: 8 bits
Sensitivity: 2 mV to 5 V/div fullyvariable; 10 V/div
DC Accuracy: ±1.5% (0.5% of full scale)
Operating Conditions: Temperature 5 – 40 deg C; Humidity 80% RH max (non-condensing) at 40 degC; Altitude
≤2000 m
Shock and Vibration: Conforms to selected sections of MIL-PRF-28800F, Class 3
Power Requirements: 90–132 V AC and 180–250 V AC; 45–66 Hz; automatic AC voltage selection; Power dissipation: 230 VA max
Dimensions (HWD): 210 mm x 350 mm x 300 mm (8.3" x 13.8" x 11.8"); height excludes scope feet
Weight: 8 kg(18 lbs)
INPUT IMPEDANCE: 50 Ohm ±1.0%; 1 MOhm // 12 pF typical (using PP006 probe)
Input Coupling:1 MOhm - AC, DC, GND; 50 Ohm - DC, GND
Max Input: 50 Ohm - 5 Vrms; 1 MOhm - 400 Vmax (peak AC < -5 kHz + DC)
Single Shot Sampling Rate per Channel: 200 MS/s max
Repetitive (RIS) Sampling Rate: 10 GS/s max
Acquisition Memory: 100 kpts/Ch
Sequence Acquisition Mode: 2 - 400 Segments
Vertical Resolution: 8 bits
Offset Range: 2 mV–50 mV/div: ±1 V100 mV–500 mV/div: ±10 V1 V–10 V/div: ±100 V
Offset Accuracy: ±(1.5% + 0.5% of full scale + 1.0 mV)
