Lecroy 9304C
Digital Oscilloscope 200MHz 100MSa/s 4Ch
Description
This oscilloscope is a graph displaying device, it draws a graph of an electrical signal.
In most applications, the graph shows how signals change over time the vertical (Y) axis represents voltage and the horizontal (X) axis represents time.
The intensity or brightness of the display is sometimes called the Z axis.
This unit's simple graph can tell you many things about a signal, such as the time and voltage values of a signal, the frequency of an oscillating signal, the moving parts of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.
Key Points
AC,DC and GND Input Coupling
External and Internal Trigger Source
Auto,Edge,Normal,Single,State,Stop,TV Trigger Modes
Minimum Trigger Holdoff of 25ns (10ns to 20ns)
CRT Monochrome Display Type
22.86cm Display Size
Infinite,Normal,Varable, X/Y Display modes
Specifications
Form Factor: Benchtop
Bandwidth: 200MHz
Number of Channels: 4Ch
Simultaneous Channels: 4Ch
Simultaneous Maximum Sampling Rate/Ch: 100MSa/s
One ch. only max. sampling rate: 100MSa/s
Max. Record Length: 50000pt/sec
Min. Vertical Sensitivity: 2mV/div to 5V/div
Rise time: 1.75ns
Number of Bits: 8bits
Input Impedance: 1Mohm
Input Impedance (alternate): 50ohms