Anritsu S332C
Cable/Antenna Analyzer 25MHz to 3.3GHz
Description
The Anritsu S332C Site Master is a hand held SWR/RL (standing wave ratio/return loss), and Distance-To-Fault (DTF) measurement instrument. Anritsu S332C includes a built-in synthesized signal source.
The S332C includes a keypad to enter data and liquid crystal display (LCD) to provide graphic indications of SWR or RL over the selected frequency range and selected distance.
The S332C Site Master can work up to 2.5 hours of continuous operation from a fully charged field-replaceable battery. The S332C can be operated from a 12.5 dc source. Built-in energy conservation features can be used to extend battery life over an eight-hour work day.
The S332C Site Master is designed for measuring various parameters such as SWR, return loss, or cable insertion loss and locating faulty RF components in antenna systems. Power monitoring (Option) is available.
The displayed trace can be scaled or enhanced with frequency markers or limit lines. A menu option provides for an audible “beep” when the limit value is exceeded. To permit use in low-light environments, the LCD can be back lit using a front panel key.
The Site Master Software Tools program can display all of the measurements made with the Site Master (SWR, return loss, cable loss, distance-to-fault) as well as providing other functions, such as converting display modes and Smith charts.
The Site Master is a field portable unit operating in the rigors of the test environment. An Open-Short-Load (OSL) calibration should be performed prior to making a measurement in the field (see Calibration, page 3-2 of data sheet).
A built-in temperature sensor in the Site Master advises the user, via an icon located on the right side of the LCD screen, that the internal temperature has exceeded a safety window and the user is advised to perform another OSL calibration in order to maintain the integrity of the measurement.
Advanced measurements require the use of additional spectrum analyzer functions beyond frequency, span, amplitude and marker functions. Spectrum analysis is within the S332C's capability.
Key Points
Integral synthesized signal generator
Rechargeable, Field replaceable battery
Light weight & Compact
Easy-to-Use
Powerful Data Analysis Software
Rugged and Reliable
RS-232 Interface
Large High Resolution(640X480) Display
Antenna isolation
Co-channel interference
Adjacent channel power
Occupied bandwidth
Inter modulation
Microwave or satellite antenna alignment
Characterization of components.
Specifications
Spectrum Analyzer:
Frequency Range 100 kHz to 3.0 GHz
Display Point (Max.) 517
Frequency Accuracy: < 75 ppm @ 25 0C
Video Bandwidth: 100 Hz to 300 kHz in 1-3 sequence
SWR: Range: 1.0 to 65.00, Resolution: 0.01
Return Loss: Range: 0.00 to 54.00 dB, Resolution: 0.01 dB
Distance-To-Fault (DTF): Vertical Range Return Loss: 0.00 to 54.00 dB
SWR: 1.00 to 65.00
Horizontal Range: 0 to a maximum of 1000m with a maximum of 517 points resolution
RF Power Monitor: Display Range:-80.0 to +80 dBm or 10.0 pW to 100.0 kW, Detector Range: –50 dBm to +20 dBm, or 10 W to 100 mW
Offset Range: 0 to +60.0 dB
Resolution: 0.1 dB or 0.1 W
Test Port Connector: Type N, 50 Ohms, female
Maximum Input without Damage: Test Port, Type N(f): +20 dBm, 50 Ohms, +50 VDC
RF Power Detector: +20 dBm, 50 Ohms, +50 VDC
Cable Insertion Loss: Range: 0.00 to 54.00 dB, Resolution: 0.01 dB
Internal Memory: Trace Memory - 200 maximum
Instrument Configuration: 10 setup locations
RS-232: 9 pin D-sub, three wire serial
Electromagnetic Compatibility: Complies with European community requirements for CE marking
External DC Input: +11 to +15 Vdc, 1250 mA max.
Storage Temperature: –20° C to 75° C
Operating Temperature: 0° C to 50° C
Dimensions: 25.4 x 17.8 x 6.1 cm, (10 x 7 x 2.4 inches)
