Anritsu MT8801B
Radio Communications Analyzer 300 kHz to 3 GHz
Description
Wireless phones for nearly every wireless telephone system in the world can be tested using just one MT8801C Radio Communication Analyzer. These systems include IS-95 and CDMA2000 1X (all 10 band classes), AMPS, GSM, GPRS, HSCSD, IS-136, PDC, and PHS with the appropriate measurement software options.
The frequency range covered is 300 kHz to 3 GHz. The optional spectrum analyzer function covers 10 MHz to 3 GHz and is very useful for measuring spurious near carrier as well as general-purpose troubleshooting. GPIB and RS-232C interfaces are standard, permitting incorporation in automated test systems. External Computer-aided Radio Communication Analysis (CRCA) software simplifies repeatable test sequences by external control of the tester over GP-IB. For CDMA2000 1X, external Protocol Monitor software records and analyzes protocol traffic between the tester and the phone under test, from the point of view of the base-station (as emulated by the tester).
The CDMA2000 1X Wireless Internet Protocol (WIP) software option provides a pipe between 1X wireless Internet devices and external networks, including the Internet. The WIP option provides the most economical tool available for controlled and repeatable testing of wireless Internet phones and applications in their native over-the-air environment for all band classes.
Key Points
Calibration functions
Wide band Power meter
Constellation display function
Adjacent channel Power measurement
Call processing function
Reception measurement
Built-in Thermal Power Meter, standard
External Control Software option for multiple formats
Wireless Internet Protocol option for development of CDMA2000 1X wireless Internet devices and applications
Specifications
Frequency range: 300 kHz to 3 GHz
Maximum input level :+40 dBm (10 W, MAIN connector), +20 dBm (100 mW, AUX connector)
Input/output connector
MAIN I/O connector
Impedance: 50 ½, N-type
VSWR: ²1.2 (²2.2 GHz), ²1.3 (>2.2 GHz)
AUX input/output connector: TCN-type
Reference oscillator
Frequency: 10 MHz
Starting characteristics: ²5 x 10–8/day (after 10 minutes of warm-up, referred to frequency after 24 hours warm-up)
Power meter
Frequency range: 300 kHz to 3 GHz
Level range: 0 to +40 dBm
Measurement accuracy: ±10% (after zero point calibration)
Signal generator
Range: 300 kHz to 3 GHz
Resolution: 1 Hz
Accuracy: Reference frequency accuracy ±100 mHz
Output level Setting range: –143 to –28 dBm (MAIN connector), –143 to –3 dBm (AUX connector)
Dimensions and mass: 426 (W) x 221.5 (H) x 451 (D) mm, ²22 kg
Power: 100 to 120/200 to 240 Vac (automatic voltage switch system), 47.5 to 63 Hz, ²300 VA
Operating temperature :0° to 50°C