Anritsu MS2711A
Spectrum Analyzer 100KHz to 3GHz
Description
The Anritsu MS2711A is a synthesized-based hand held spectrum analyzer (HHSA) with which measurements can be easily made by using the main instrument functions: frequency, span, amplitude and bandwidth.
The Anritsu MS2711A provides quick and accurate signal results.
The MS2711A has dedicated keys for common functions and a familiar calculator type keypad are available for fast data entry.
Automatic time and date stamping of measurement data of up to 200 results is provided in the MS2711A as is storage and recall of up to 10 different measurement setups.
A large, high-resolution liquid crystal display (LCD) provides easy viewing in a variety of lighting conditions.
The Anritsu MS2711A HHSA is capable of up to two and one-half hours of continuous operation from a fully charged battery and can be operated from a 12.5 Vdc source (which will also simultaneously charge the battery). Built-in energy conservation features can be used to extend battery life over an eight-hour workday.
The Anritsu MS2711A HHSA is designed for monitoring, measuring, and analyzing signal environments. Typical measurements include: in-band interference, transmit spectrum analysis, antenna isolation and cell area interference.
A full range of marker capabilities such as peak, center and delta functions are provided for faster, more comprehensive measurement of displayed signals. Limit lines are available for creating quick, simple pass/fail measurements.
A menu option provides for an audible beep when the limit value is exceeded. To permit use of the MS2711A in low-light environments, the LCD can be back lit using a front panel key.
Measurements stored in the Anritsu MS2711A HHSA internal memory can be down-loaded to a PC using the included null-modem serial cable. Once stored, the graphic trace can then be displayed, scaled, or enhanced with markers and limit lines.
Historical graphs can be overlaid with current data using the PC mouse in a drag-and-drop fashion. The underlying data can be extracted and used in spreadsheets or for other analytical tasks.
The Anritsu MS2711A HHSA loads factory calibration data during start-up, eliminating the need for daily calibration checks.
The Anritsu MS2711A HHSA is a lightweight, hand held, battery operated unit designed
specifically for field environments and applications requiring mobility.
There are seventeen keypad hard keys located to the right of the display. Twelve of the keypad hard keys are dual purpose, depending on the current mode of operation. The dual purpose keys are labeled with one function in black, the other in blue.
Key Points
Handheld, battery operated design
Lightweight at only 4.9lbs
Noise Level < -115dBm
Quick Zoom-in, Zoom-out display in 1-2-5 sequence
RBWs: 10KHz, 30KHz, 100KHz and 1MHz
VBWs 100Hz to 300KHz in 1-3 sequence
Automatic and manual attenuator control
Amplitude Accuracy +/- 2dB
Dedicated One-button measurements
Trace Averaging
Reference Level Offset
Store up to 10 measurement test set-ups
Save up to 200 measurement traces
Alphanumeric labeling of saved measurements
Automatic time and date stamp of saved data
Rechargeable/field-replaceable battery
4 Markers, limit lines
RS232 Interface
Specifications
Dynamic Range: +30dBm to -115dBm
Input Impedance: 50ohms
Resolution Bandwidth:10KHz to 1MHz
Video Bandwidth: 100Hz to 300KHz
Frequency Range: 100 kHz to 3000 MHz
Accuracy: 2 ppm
Sweep Time: 650 ms full span; 400 ms zero span
SSB Phase Noise: 75 dBc/Hz, 30 kHz offset @ 1 GHz
Video Bandwidth: 100 Hz to 300 kHz in 1-3 sequence
RS232 Interface: Type - Null modem, Baud Range 9600 to 56k baud
Dimensions: 10 X 7 X 2.25 inches, 25.4 X 17.8 X 6.1 centimeters
Weight: 4 pounds (1.8 kg) including battery
Temperature: Operating - 0 to +50 deg C, 85% or less humidity, Non-operating: –20 to +75 deg C