Anritsu MP1763C
Digital Transmission Tester 12Gb/s
Description
This tester is used in combination with the MP1764C or MP1764D Error Detector for 12.5G BER testing.
The amplitude of the clock and data signals can be varied from 0.25 to 2Vp p while the offset can be adjusted to within ±2V so that the amplitude and the offset margin can be measured.
The clock has a variable delay function so that time dependent characteristics or phase margins of the input clock and data can be measured.
An M series pseudorandom pattern representative of actual conditions or a programmable pattern can be selected as cell data.
1/8 parallel output is standard, and options are available for either 1/4 parallel output or 1/4 differential output.
This is the industry's only 12.5G BERT system with differential inputs and ¼ differential outputs required for SAN market device applications.
In addition, a 3.5 inch floppy disk drive is built in for storing preset data, enabling rapid measurements to be performed by simply pressing a key.
A GPIB function is provided, enabling automatic or remote measurement via an external controller.
This unit's pulse pattern generator is ideal for research and development of high speed logic, ICs, and digital systems.
Key Points
High quality waveform
Wide frequency range
Low FM/PM-noise clock generator
Differential inputs
Complementary outputs for both data and clock
Specifications
Frequency Range: 12Gb/s
Type: Digital
Transmission: 12.5GHz syntesizer
Min. Data Rate: 50.00Mbps
Max. Data Rate: 12.50Gbps
Number of Channels: 3