Anritsu 560-98S50
SWR Auto Tester 10MHz to 26.5Ghz
Description
This SWR Autotester will integrate a high directivity bridge, a detector, a low reflection test port, a precision reference termination, and a connecting cable.
The 560-98S50 is a broadband microwave measurement component that is used with the Model 56100A and 562 Scalar Network Analyzers.
It is also used with Series 541XXA, 540XXA, and 54XXA Scalar Measurement Systems for making fixed-frequency and swept-frequency return loss (SWR) measurements.
The return loss measurements are used over a wide range of radio and microwave frequencies to check the performance of he systems, the subsystems, and the microwave components that would be the amplifiers, the directional couplers, the attenuators, the filters, the splitters, and the terminations.
Key Points
Frequency range: 10MHz to 26.5GHz
Directivity: 37dB (10MHz to 18GHz), 36dB (18GHz to 26.5GHz)
Directivity for 560-98S50-1: 40dB (10MHz to 18GHz), 38dB (18GHz to
26.5GHz)
Insertion loss: 6.5dB nominal
Maximum input power: 0.5W
Input Port Impedance: 50Ω
Detector output polarity: negative
Cable Length: 122cm (4 ft.)
Test port connector: WSMA(m)
Shipping weight: 2lb
Specifications
Frequency range: 10MHz to 26.5GHz
Directivity: 37dB (10MHz to 18GHz), 36dB (18GHz to 26.5GHz)
Directivity for 560-98S50-1: 40dB (10MHz to 18GHz), 38dB (18GHz to
26.5GHz)
Insertion loss: 6.5dB nominal
Maximum input power: 0.5W
Input Port Impedance: 50Ω
Detector output polarity: negative
Cable Length: 122cm (4 ft.)
Test port connector: WSMA(m)
Shipping weight: 2lb