Anritsu 54147A
Network Analyzer, 10 MHz to 20 GHz
Description
This network analyzer is an instrument which measures the complex transmission and reflection characteristics of two port devices in the frequency domain.
It does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two port.
Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest.
These network analyzers utilize synthesized frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels.
It also can perform ratioed measurements (including phase), which require multiple receivers.
This unit provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group delay response.
Key Points
Fast, accurate measurement
Crystal based source
Built in automation
Built in floppy disk
Rugged,reliable chassis
High Dynamic Range
High Resolution
N (f) Output Connector
Specifications
Form Factor:Benchtop
Type:Scalar
Integral Signal Source:Yes
Integral Test Set:No
Source Minimum Frequency:0.01 GHz
Source Maximum Frequency:20 GHz
Source Frequency Resolution:100 kHz
Source Frequency Accuracy:0.00001 %
Output Impedance:50 Ohm
No. of Receiver Channels:2 ch
Minimum Dynamic Range:-55 dBm
Maximum Dynamic Range:+16 dBm
User Interface:Proprietary
Ports to Peripheral Devices:GPIB
Test Pattern Storage:13 Patterns
Novram data storage:Yes
Data Storage Type:FDD
Width: 426 mm(16.77 in)
Height: 177 mm(6.96 in)
Length: 476 mm(18.74 in)
Weight: 18 kg(39.68 lb)