Anritsu 54107A
Network Analyzer, 1 MHz to 1.5 GHz
Description
The Anritsu 54107A network analyzer is an instrument which measures the complex transmission and reflection characteristics of two-port devices in the frequency domain. It does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two-port. Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest.
Anritsu 54107A network analyzers utilize synthesized-frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels. Anritsu 54107A network analyzers also can perform ratioed measurements (including phase), which require multiple receivers. The Anritsu 54107A can provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group-delay response.
Key Points
Fast, accurate measurement
Crystal-based source
Built-in automation
Built-in floppy disk
Rugged, reliable chassis
High Dynamic Range
High Resolution
N (f) Output Connector
Specifications
Form Factor:Benchtop
Type:Scalar
Integral Signal Source:Yes
Integral Test Set:No
Source Minimum Frequency:0.001 GHz
Source Maximum Frequency:1.0 GHz
Source Frequency Resolution:10 kHz
Source Frequency Accuracy:0.0001 %
Output Impedance:50 Ohm
No. of Receiver Channels:2 ch
Minimum Dynamic Range:-55 dBm
Maximum Dynamic Range:16 dBm
User Interface:Proprietary
Ports to Peripheral Devices:GPIB
Test Pattern Storage:13 Patterns
Novram data storage:Yes
Data Storage Type:FDD
Width: 426 mm(16.77 in)
Height: 177 mm(6.96 in)
Length: 476 mm(18.74 in)
Weight: 18 kg(39.68 lb)
