Agilent / HP / Keysight 86108A
86108A Precision Waveform Analyzer
Description
Accuracy and ease-of-use for high-speed digital communications signals.The 86108A Precision Waveform Analyzer is a plug-in module used with the 86100C DCA-J. The 86108A has a bandwidth in excess of 33 GHz, channel noise of less than 300 uV, and residual jitter at an astounding level of under 100 femtoseconds (60 fs typical). Integrated clock recovery provides a 'triggerless' single connection measurement to rates as high as 13.5 Gb/s and allows analysis even in the presence of spread-spectrum clocking. PCI EXPRESS is a registered trademark of PCI-SIG With Agilent CertiPrime| Premium Remanfactured Equipment you receive: - Savings up to 70% off list - Like new quality and performance - Updated firmware and software - Full production Calibration with print out - Same accessories and manuals as new units - Same warranty and return policy as new units
Key Points
High bandwidth, low noise, ultra-low residual jitter
Simple one connection
PLL characterization including loop BW/jitter transfer
Integrated HW clock recovery with adjustable loop BW/Peaking-exceeds industry standards for SSC tracking
Easy setup for serial bus differential signaling (PCI-EXPRESS®, SATA etc.)
Specifications
No. of optical channels:2
Electrical bandwidth (GHz):32
Bandwidth:16 GHz and < 32 GHz, (35 GHz)
Transition time:10 ps
RMS noise Maximum:350 μV (16 GHz) 700 μV (32 GHz)
Scale factor (per division) Maximum: 100 mV/division
Input dynamic range:±400 mV
Maximum input signal:±2 V (+16 dBm)
Nominal impedance:50 Ω
Electrical input:3.5 mm (male)