Agilent / HP 8513A
300KHz to 3GHz Reflection Transmission Test Set
Description
This is a 300KHz to 3GHz, Reflection Transmission Test Set.
This test set has integral components of the HP 8510 measurement system.
For that reason, this manual has been divided into two major portions to be an integral part of the HP 8510 documentation.
Key Points
One bridge for making reflection and transmission measurements
Three RF to IF converters
No step attenuators to internally change the incident power level
No bias tees to apply external DC bias to the test port center conductors
Specifications
Connector type: 3.5mm
Impedance: 50ohms
Nominal connector nut size: 20mm
Recommended torque: 90n-cm
