Agilent / HP 85135D
Test Port Cable Set 7 m to 2.4mm
Description
This is a 53cm (21 in) long1 semi rigid cable set composed of two 2.4mm female2 to 7 mm connectors.
Cable frequency range is DC to 18GHz with a return loss of 17dB or better.
Insertion loss is 0.31 * sqrt (f) + 0.2, where f is frequency in GHz, for the test port connector and 1.5dB at maximum frequency for the device connector.
Phase stability of semi rigid/flexible cables is specified with a 90 degree bend using a 4 to 3inch radius.
This unit is less than 0.06dB and phase is 0.18*f, where f is frequency in GHz.
Key Points
Cable length and stability are supplemental characteristics
Special rugged female connector is designed specifically for connecting to the network analyzer test port, but does not mate with a standard male connector
Specifications
Form Factor: Benchtop
Type: Cables
Minimum frequency: 0Hz
Maximum frequency: 18GHz
Connector Type to DUT: 7mm(f)
Inter connect connector type: 7mm(f)
Return Loss: 17dB
Insertion Loss: 0.31
