Agilent / HP 85132E
Test Port Cable
Description
This unit is a 97.2cm (38.25in) long(1) flexible cable with a 3.5mm female(2) to 7mm female connector.
It's Insertion loss is 0.35*(f/2) + 0.3, where f is frequency in GHz, for the test port connector and 1.8dB at maximum frequency for the device connector.
Phase stability of semi rigid/flexible cables is specified with a 90degree bend using a 4 to 3inch radius.
Stability1 of this unit is less than 0.22dB and phase is 0.16*f + 0.8, where f is frequency in GHz.
Cable length and stability are supplemental characteristics.
Special rugged female connector is designed specifically for connecting to the network analyzer test port, but does not mate with a standard male connector.
Key Points
Return loss of 17dB
Semi rigid w/ 90deg bend
Does not mate w/ standard connector
Specifications
Form Factor: Benchtop
Type: Cables
Minimum Frequency: 0Hz
Maximum Frequency: 18GHz
Connector Type to DUT: 3.5mm(f)
Inter connect connector type: 7mm(f)