Agilent / HP 8483A
Power Sensor 100kHz-2GHz 75 Ohm
Description
The Agilent / HP 8483A Power Sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the 43x series power meters, and provides extraordinary accuracy and stability.
The Agilent / HP 8483A power sensor is designed for use with the 435B, 436A, 437B, 438A, 70100A, and the E4418B and E4419B power meters.
These thermocouple and diode power sensors provide extraordinary accuracy, stability, and SWR over a wide range of frequencies (100 kHz to 2 GHz) and power levels (+10 dBm to +20 dBm).
The 8483A power sensor also gives you extremely low SWR.
The Agilent / HP 8483A unit has extremely low SWR and is traceable to the U.S. National Institute of Standards and Technology (NIST).
A calibration port is included with the above power meter for calibration with the power sensor.
This calibration eliminates the uncertainties due to temperature changes and the variance in making measurements with different meter / sensor combinations.
Key Points
75ohms input impedance power sensor
Excellent SWR for reducing mismatch uncertainty
Accurate calibration and traceability
Accurate average power measurements over -30 to +20 dBm
Frequency range from 100 KHz to 2 GHz
Thermocouple power sensing element
Specifications
Accuracy or Linearity: 0.6 dB
Connector Type: Type-N(f)
Frequency Range: 100 kHz to 2 GHz
Interfaces/Other: 0 dB - Impedance
Min/Max Power: 10 dBm to 20 dBm
Type: Power Sensor
Input Impedance: 75 ohms
Net Weight: 0.2 kg (0.38 lb)
Shipping Weight: 0.5 kg (1.0 lb)
