Agilent / HP 11683A
Range Calibrator
Description
This unit is specifically designed for use with the EPM, EPM-P series, E1416A and the discontinued 70100A and 43X power meters.
It allows verification of full-scale meter readings on all ranges, as well as meter tracking.
Simply connect the cable between the power meter and calibrator.
The CAL ADJ control on the power meter is used to set the meter to full scale on the 1mW range.
Key Points
Verification of full-scale meter readings on all ranges and meter tracking
Polarity switch that tests the auto-zero circuit
Calibration Functions: Outputs corresponding to meter readings of 3, 10,
30, 100, and 300uW; 1, 3, 10, 30, and 100mW
Calibration Uncertainty: ±0.25% in all ranges
Power: 100, 120, 220, or 240Vac +5% -10%, 48 - 440Hz, less than 10VA
Size: 133mm W x 89mm H x 216mm D (5.25in x 3.5in x 8.5in)
Specifications
Frequency Range: 50Hz - 400Hz
Interfaces/Other: 0.25%
Min/Max Power: 115V - 230V
Calibration Uncertainty: ±0.25% in all ranges
Power: 100, 120, 220, or 240Vac +5% -10%, 48 - 440Hz, less than 10VA .
Size: 133mm W x 89mm H x 216mm D (5.25in x 3.5in x 8.5in).