Advantest R4131C
Spectrum Analyzer 10KHz to 3.5GHz
Description
The R4131C covers a bandwidth as wide as 10kHz to 3500 kHz and is controlled by a microcomputer. This analyzer features easy conformance to all measuring conditions.
The panel of the R4131C equipment enables its three major functions to be independent of each other, and its layout makes for excellent operability. In addition, the resolution band, sweep time and input attenuator values are set automatically by its AUTO feature.
Refrain from using the R4131C equipment in a place subject to much vibration direct sunlight, and where corrosive gas is generated. This unit is designed for indoor use.
Also, do not use the R4131C where the ambient temperature is outside 0 to 50 deg C and relative humidity is less than 85%.
Since this equipment employs a suction type cooling fan to prevent the internal temperature from rising, install this equipment 10 cm or more from the wall, and do not place anything close to its back nor use this equipment in an incorrect position.
Although the equipment was designed for noise from the AC power supply line use it where there is low noise as far as possible, and use a noise filter in a noisy environment.
Key Points
5.5in. CRT Display
Auto Recall Function
Quasi Peak Value Measurement Function
Waveform Can Be Saved In Memory
Field Strength Measurement
Occupied Bandwidth Measurement
Video Signal Modulation Analysis
No Noise Source Driver
Specifications
Dynamic Range: +25dBm - -116dBm
Frequency Range: 10KHz - 3.5GHz
Input Impedance: 50ohm
Other Features: -100dBc/H
Residual FM GPIB: - -5dBc/Hz
Resolution Bandwidth: 1KHz - 1MHz
Video Bandwidth: 10Hz - 1MHz