Advantest R3767CG
Network Analyzer 8GHz
Description
The Advantest R3767CG unit is a unique high-speed signal processing technology enables a faster measurement speed.
In R3767CG, the execution environment of BASIC-language programs is provided, the BASIC programs created on external personal computers etc. can be executed.
In addition to the basic model, a model with built-in bridge transmission/reflection characteristic measurement and a model with a built-in S-parameter test set for forward and reverse measurement are also available.
An optional 3-port test set or 4-port test set can be added to these models.
By installing additional input channels in the receive section, the multi-port models allow perfectly simultaneous measurement of two different measurement paths, revolutionizing the measurement efficiency of multi-port devices.
When the power is switched on, the state of R3767CG gets into the measurement mode, in which the frequency of filter etc. can be measured. The BASIC commands and programs can be entered from the external keyboard in the program mode.
The program mode consists of “direct mode” and “edit mode”. In the initial state, the direct mode is set. In the direct mode, the entered character string is executed after it is sent to the BASIC directly. In the edit mode, the entered character string is not executed. The measurement can also be performed in the program mode.
The built-in functions are used to compute and analyze the captured measurement data at a high speed with the CPU incorporated. The built-in functions can be used for all types of R3767.
Key Points
Frequency Accuracy: +/- 3ppm
Frequency Range: 300KHz - 8GHz
Frequency Resolution: 1Hz
Output Impedance: 50ohms
Output Power Range: -10dBm - +10dBm
Output Resolution: .01dB
Sweep Range: 300KHz - 8GHz
Specifications
Frequency Accuracy: +/- 3ppm
Frequency Range: 300KHz - 8GHz
Frequency Resolution: 1Hz
Output Impedance: 50ohms
Output Power Range: -10dBm - +10dBm
Output Resolution: .01dB
Sweep Range: 300KHz - 8GHz
Monitor: 8.4-inch TFT color LC monitor
When FDD is used: Temperature Range: +5 to +40°C Relative Humidity; 80% or less (no condensation allowed)
When FDD is not used: Temperature Range; 0 to +50°C Relative Humidity; 80% or less (no condensation allowed)
Storing Conditions: -20 to +60°C
Power Source: 100 VAC to 120 VAC, 50 Hz/60 Hz
220 VAC to 240 VAC, 50 Hz/60 Hz
External Dimensions: Approx. 424 (W) x 220 (H) x 400 (D) mm
Mass: Approx. 18.5 kg or less
Power Consumption: 250 VA or less